8K Resolution, Larger Print Area, and Air Purification

The Anycubic Photon M3 Premium gives an improved print decision with two air purifiers to fight these pesky poisonous resin odors. Nonetheless, there’s way more to think about with a 3D printer past the headline decision. Because the premium entry within the Photon collection, does the M3 Premium ship elsewhere?

Anycubic Photon M3 Premium Design

For these conscious of Anycubic’s Photon line-up, the Photon M3 Premium does not deviate from the acquainted yellow cowl. However this printer stands aside with its bigger measurement. For these trying to make the most of its bigger construct quantity, you will have to put aside house for its sizable physique of round 12.9 (L) x 13.8 (W) x 24.6 (H) inches.

On the first removing from its transport field, you will discover there’s some heft to it. This resin 3D printer weighs 19kg (simply shy of 41 kilos). If you do not have a devoted house put aside, you will need to make sure the floor can assist its weight, particularly if it isn’t positioned alone.

Different acquainted design components additionally play into how the M3 Premium operates. The laser-engraved checkered build-plate returns to offer improved adhesion and remove the necessity for any sanding. This comes alongside twin Anycubic AirPure items that may be put in instantly into the printer.

To navigate by way of the printer’s menus and arrange your prints, the M3 Premium gives a 4.3-inch resistive contact display. Whereas smaller than the contact display of the Photon M3 Plus, it is nonetheless responsive and usable even for larger-handed operators.

For USB connectivity, Anycubic has determined to position it on the fitting aspect. Whereas nonetheless positioned towards the entrance, it is one other factor to be aware of with the printer’s placement. The facility change and rope additionally stem from the identical aspect, with a Wi-Fi antenna positioned on the very again of the printer.

On one other word, in the event you aren’t utilizing Anycubic’s included USB drive, you’ll want it appropriately formatted and guarantee it doesn’t exceed 8 GB in measurement for smoother operation. Utilizing a dependable model like Sandisk will help with this, however in the event you do find yourself with any USB-related errors, it is a typical wrongdoer.




Anycubic Photon M3 Premium Technical Specs

As a “Premium” product, you will anticipate the specs to match appropriately.

The M3 Premium characteristic a ten.1″ 8K monochrome LCD display with 28.5μm (microns) accuracy. So for these trying to squeeze an additional mannequin in or match that barely bigger piece, it’s a welcome measurement improve to the likes of the M3 Plus. As a trade-off, the potential print velocity barely suffers at round ≤ 95mm per hour.



Past these, the M3 Premium makes use of Anycubic’s LighTurb mild supply. This offers higher mild uniformity of over 90% to cut back the possibility of sunshine straying. So for these in search of sharper-looking prints, the improved mild supply helps right here.

Setting Up the Anycubic Photon M3 Premium

For those who’re new to 3D printing, the preliminary set-up and leveling of the construct plate could be a little little bit of a studying space for some. However this course of continues to change into more and more streamlined through construct plate tweaks to permit for much less incidental points, plus the inclusion of pre-cut leveling paper. 

For the Premium M3 Plus, it is nonetheless a lot the identical process as earlier than, with the tip consequence requiring a agency press on the construct plate whereas tightening its 4 screws earlier than setting the zero place.

From right here, it is a easy matter of securing the large-volume (1.35L) resin vat through its two knobs. A small display protector package can also be included to forestall unintentional resin spills on the display. Nonetheless, getting an ideal bubble-free end can show difficult.

Not like different elements of the M3 line-up, comparable to the automated feeding techniques, putting in the 2 air air purifier items is usually a plug-and-play affair. Previous to set up, take away every air purifier’s high, which protects the carbon filter. As soon as powered on, you’ll see a particular LED mild behind the anti-UV cowl.

Enhancing Airflow with the M3 Premium

With 3D printers, the usefulness of any further equipment is determined by the printing procedures of their respective customers. In a extra generalized use case, Anycubic has opted to incorporate two of its air purifiers with built-in USB plugs. With odor sensitivity and respiratory considerations being an ongoing rivalry level of 3D printing, this does not come as a lot of a shock.

Nonetheless, there’s all the time a query of effectiveness when working with an air air purifier and the way a lot of an space is handled. By way of operation, Anycubic notes that it could possibly obtain round 80% odor removing inside 10 minutes.

And somewhat than a gimmick, it holds fairly true with no notable resin odor impacting a small room with two M3 Premium printers operating without delay. Whereas this may not change using a masks, it is an extra filtration choice for these trying to scale back an disagreeable component of the printing course of.

You will nonetheless need to routinely change the activated carbon filters inside Anycubic’s advisable 3-6 month window. Each purifiers additionally run almost inaudibly, so there isn’t any further noise throughout the printing course of.

A latest firmware replace solved my solely actual criticism with the system. Beforehand in the event you turned the M3 Premium printer on, its twin air purifiers wouldn’t additionally robotically activate as nicely. With this transformation made, there isn’t any want to recollect to manually flip each on or allow them through the contact display.

Printing on the M3 Premium

With regards to truly printing with the M3 Premium, Anycubic has tried to enhance print success whereas increasing choices for its consumer.

 To this finish, I usually need to check a wide range of designs amongst small and medium sizes to see how successfully a printer works. That often means a mixture of massive and multipart items relying on the modeler.



For the Premium M3 Plus, the bigger construct plate alongside the nFEP movie offers a greater situation to check print success and failures. Print failures generally consequence from layers sticking to the movie, however fortunately, I did not run into this throughout testing.

As all the time, you need to watch out of your mannequin placement and take note of the physics of the printing course of. Nonetheless, for these anxious about getting profitable prints, it is a a lot easier affair on the M3 Premium with the fitting settings. The newer nFEP is extra sturdy leading to an prolonged lifespan in comparison with different printers.

The 1.35-liter resin vat of the M3 Premium additionally boasts a 60% improved capability. One other frequent concern with resin printing is operating out of sufficient resin mid-print, so the choice to host greater than sufficient can scale back the burden of tighter resin administration. Even at visibly low ranges, there’s usually sufficient to complete fairly a number of prints—particularly when working with miniatures.

Along with printing from an acceptable USB drive, Anycubic additionally intends for cell printing through the Anycubic app. Sadly, on the time of testing with the suitable firmware replace, connectivity points nonetheless occurred. In consequence, I could not check the wi-fi printing characteristic.

As for cleansing and upkeep for the printing course of, the one annoyance was that the construct plate’s upward-facing bolts had been magnets for resin build-up. For people who do a number of prints back-to-back, this does not change your working course of a lot. Nonetheless, in the event you’re extra of an occasional printer, the extra give attention to cleansing could show inconvenient.

When getting ready information to print, the M3 Premium makes use of Photon Workshop. Whereas it is a extra primary and barely sluggish slicer, it is supposed purely to slice your print information. Usually, you will need to make modifications in additional centered software program like Lychee for extra in depth choices, comparable to including your individual helps.

Nonetheless, in the event you’re already utilizing principally pre-supported fashions, you will solely have to tweak your print settings and work on placement inside Photon Workshop.

8K High quality Prints With the Photon M3 Premium

To check print outcomes and high quality, I labored foremost with Anycubic’s ABS-like Resin Professional, whereas additionally making an attempt Phrozen’s 8K resin as a comparability metric. Anycubic’s ABS-like resin additionally brings the added benefit of permitting a bit extra bend to the fashions and resistance to falls. This supplied extra flexibility when working with delicate mannequin items, particularly throughout the assist removing.

As a secondary metric, I reprinted acquainted fashions to search for discernable high quality variations. I experimented with each a mannequin that I’ve printed in 4K and 6K decision beforehand, in addition to one which had solely been printed at 6K earlier than. In each of those circumstances, there have been small upgrades discernable among the many total elevated sharpness of the fashions.

Nonetheless, this will not be a adequate motive to improve your machine, particularly when the element is not all the time apparent to an untrained eye. However in the event you’re a working towards 3D modeler or in search of the best possible high quality outcomes earlier than portray, it is a trade-off to weigh.

Ought to You Purchase the Anycubic Photon M3 Premium?

For those who’ve favored what Anycubic has carried out with its earlier Photon printers, you’ll seemingly discover a lot to love concerning the M3 Premium. However the decision improve of the M3 Premium won’t be price it for all. If, nonetheless, you need probably the most correct illustration of your 3D fashions whereas capitalizing on its massive print quantity, the M3 Premium is definitely engaging.

The printing course of is dependable, albeit slower, whereas printing at extra conservative settings. There are only a few criticisms that I can supply, and it does what it units out to. 

Principally, you’ll have to suppose if the M3 Premium’s total measurement and print quantity fit your wants and whether or not these air purifiers convey added worth for you. Nonetheless, in the event you’re keen to capitalize on its strengths and have to work with a wide range of prints, the M3 premium gives wonderful worth.