Electroplating is an effective way so as to add energy or shine to a 3D print. Nonetheless, we don’t see too many individuals attempting it with gold. [HEN3DRIK] isn’t afraid to experiment, although, and pulled off some wonderful, high-quality jewelry-grade plating!
The design for the mission was the so-called Ring of Energy from Lord of the Rings. The print was created on a resin printer at a top quality stage, washed totally to take away any remaining resin, after which cured. The print was then post-processed with sandpaper to make it as clean as potential. Conductive paint was then utilized, able to tackle the plating layers. [HEN3DRIK] first began by plating copper to construct up a troublesome base layer, then nickel to stop mixing between the copper and gold. The gold is then lastly plated on prime. Plating the copper is finished with the ring continually rotating to get as even a coat as potential. In distinction, the gold plating is finished with a brush to keep away from losing the highly-expensive plating answer.
The ultimate result’s a gleaming gold ring that in all probability feels surprisingly gentle within the hand. The approach is time consuming, because of the necessity to plate a number of layers, however the outcomes are to die for. We’ve seen [HEN3DRIK]’s tremendous work earlier than, too. Video after the break.